08-05-2022, 11:30 AM
(This post was last modified: 08-05-2022, 12:24 PM by Duncan Grimmond.)
Thanks for that Smiley.
To save further individual emails the prices are:
Tinplate: £180.00 (or £150.00 if you supply a Pratts or similar polished filler neck & cap)
Brass: £240.00 (similarly £30.00 reduction for your filler)
Mounts not included.
Capacity approx 2/3 gallon.
Postage is usually around £8.00 insured & tracked
I have been asked about and have seen rectangular section tanks as per a Pratt's Motor Spirit 2 gallon but with a sloping base. I made one as a trial but was not happy with it as it was a quite weighty when full (over a gallon capacity) and also a bit top heavy owing to its shape and I feel this tends to put a bit of a strain on the wing.
To save further individual emails the prices are:
Tinplate: £180.00 (or £150.00 if you supply a Pratts or similar polished filler neck & cap)
Brass: £240.00 (similarly £30.00 reduction for your filler)
Mounts not included.
Capacity approx 2/3 gallon.
Postage is usually around £8.00 insured & tracked
I have been asked about and have seen rectangular section tanks as per a Pratt's Motor Spirit 2 gallon but with a sloping base. I made one as a trial but was not happy with it as it was a quite weighty when full (over a gallon capacity) and also a bit top heavy owing to its shape and I feel this tends to put a bit of a strain on the wing.