27-04-2022, 07:55 AM
(27-04-2022, 12:20 AM)Marcus Ling Wrote: Hi Henry,
Is there anything that supports the middle of the floor pan onto the rear cross-member. Ours seems well supported at the front and at rear on the sides, however it tends to sag in the middle about where the seats go.
Many Thanks
Marcus
The original fixings/supports are as per my drawing.
The 2 fixings shown as "To Chassis" are 5/16" nuts and bolts through the floor and the main chassis rails.
The prop shaft tunnel is a very important part of the structure.