And look very carefully at what you already have.
I machined the teeth off late type starter flywheel, which is a pretty brutal and jarring task, believing the teeth to be the originals. It was only some months later, after being balanced and used in competition, that the vestigial ring of the previously shrunk on replacement gear broke at a balancing hole. It made a minor clatter before expanding to fit tightly inside the bellhousing.
c
I machined the teeth off late type starter flywheel, which is a pretty brutal and jarring task, believing the teeth to be the originals. It was only some months later, after being balanced and used in competition, that the vestigial ring of the previously shrunk on replacement gear broke at a balancing hole. It made a minor clatter before expanding to fit tightly inside the bellhousing.
c