28-03-2022, 07:43 PM
Jon,
My wife and I successfully bent a length of 1 1/4” OD steel tube for the exhaust on our EA replica. We used a plumber’s spring on a rope, a short scaffold pole and a length of kitchen worktop with radiused corners. We tethered the worktop to a telegraph pole in our garden and made a strap to hold the tube onto the worktop while we bent it. Lots of trial and error, but we were pleased with the result.
Alan
My wife and I successfully bent a length of 1 1/4” OD steel tube for the exhaust on our EA replica. We used a plumber’s spring on a rope, a short scaffold pole and a length of kitchen worktop with radiused corners. We tethered the worktop to a telegraph pole in our garden and made a strap to hold the tube onto the worktop while we bent it. Lots of trial and error, but we were pleased with the result.
Alan