28-03-2022, 07:18 PM
I wrecked the thread in one carburettor body when trying to tighten the banjo bolt sufficently to eliminate the petrol leak. Don't bother annealing the fuel pipe. I went one better and put in a flexible section of pipe which still didn't allow me to cure the leakage.
I finally used a sealant on both surfaces of the banjo and on the sides of the fibre washer and gently tightened the banjo bolt. It's been leak-free for a year now.
I finally used a sealant on both surfaces of the banjo and on the sides of the fibre washer and gently tightened the banjo bolt. It's been leak-free for a year now.