20-03-2022, 08:39 AM
Erich, there are indeed 4 body supports. 2 as per my original post. These are riveted to the bottom of the joining flanges of the bulkhead and the front of the aluminium body skin.
(This is a TT but the bottom of the bracket is exposed)
The rear pair are riveted to the sloping rear floor and fit to the end of the chassis extensions.
Screenshot 2022-01-25 at 15.27.17.png (Size: 130.5 KB / Downloads: 449)
Screenshot 2022-01-25 at 15.22.50.png (Size: 382.13 KB / Downloads: 450)
The floor ir also attached to chassis front cross-member either side of the gearbox. There are also 2 fixings between the flat floor and the main chassis members.
(This is a TT but the bottom of the bracket is exposed)
The rear pair are riveted to the sloping rear floor and fit to the end of the chassis extensions.
Screenshot 2022-01-25 at 15.27.17.png (Size: 130.5 KB / Downloads: 449)
Screenshot 2022-01-25 at 15.22.50.png (Size: 382.13 KB / Downloads: 450)
The floor ir also attached to chassis front cross-member either side of the gearbox. There are also 2 fixings between the flat floor and the main chassis members.