14-03-2022, 06:41 PM
hi oxford,
there can be a number of things.
first did you use a kingpin reamer, or a standard reamer?
i know many use a standard reamer on girling, but if its not gone through straight. the hole will pull the reamer to the hole. then when the pin is tightend, it goes tight in the hole.
also are you saying there was NO wear in the eyes at all? if so you do the kingpins.
tony
there can be a number of things.
first did you use a kingpin reamer, or a standard reamer?
i know many use a standard reamer on girling, but if its not gone through straight. the hole will pull the reamer to the hole. then when the pin is tightend, it goes tight in the hole.
also are you saying there was NO wear in the eyes at all? if so you do the kingpins.
tony