The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.30 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Oil leak from the petrol pump
#1
Have managed to eliminate many oil leaks on Ruby but the one that currently remains and is being very persistent is one from the petrol pump. 
I had already purchased and fitted a kit including diaphragm etc and in the last month or two replaced the gasket between the pump and sump joint along with blue hylomer and am pretty happy the leak is not from this joint as there is no sign of any oil around the joint either from or under the pump and the sump is clean.
However the leak appears to emanate from around the pin that the cam lever oscillates about runs down and drips down from that area. It appears to be quite significant in that a run of just 15 to 20 miles is enough to form a decent pool of oil at the bottom of the sump.
As always any comments and advice much appreciated
Cheers Denis S
Reply


Messages In This Thread
Oil leak from the petrol pump - by Denis Sweeney - 11-03-2022, 03:08 PM
RE: Oil leak from the petrol pump - by Hedd_Jones - 11-03-2022, 03:59 PM
RE: Oil leak from the petrol pump - by Bob Culver - 09-05-2022, 11:00 PM

Forum Jump:


Users browsing this thread: 4 Guest(s)