08-03-2022, 06:57 AM
Current off the shelf ac bearings can be used in either configuration altho back to back give superior rigidity, an advantage in some
applications. (I ponder if crank ac would be better mounted front to front) Precision matched pairs only go one way and the narrow rings ensured this. Also ensured one not reversed (Any and everything is found in old cars)
Old bearings if all smooth can be reused. Can shim for very slight preload.
I cannot immediately fathom the 1930 set up but gather not what you have.
Whatever bearings used the outer rings must be clamped axially. The pionion space lenghth must be such that a reasomabe space for shims is allowed at the diff flange.
The oil seal arrangement is not as all.
If sumwun can explain the 1930 diag would be interested pse.
applications. (I ponder if crank ac would be better mounted front to front) Precision matched pairs only go one way and the narrow rings ensured this. Also ensured one not reversed (Any and everything is found in old cars)
Old bearings if all smooth can be reused. Can shim for very slight preload.
I cannot immediately fathom the 1930 set up but gather not what you have.
Whatever bearings used the outer rings must be clamped axially. The pionion space lenghth must be such that a reasomabe space for shims is allowed at the diff flange.
The oil seal arrangement is not as all.
If sumwun can explain the 1930 diag would be interested pse.