03-03-2022, 10:36 AM
My ammeter reading on the dashboard at high revs gets up around 10 or 12 and drops to zero at tick over. In the Companion, page 205 there is an article by R Duffield that says for Lucas equipment the reading should be 6 - 7.
Early Ruby with a C35M dynamo
Should I correct this down by adjusting the third brush or is there anything else I should be looking at, all comments welcome.
Cheers Denis S
Early Ruby with a C35M dynamo
Should I correct this down by adjusting the third brush or is there anything else I should be looking at, all comments welcome.
Cheers Denis S