25-02-2022, 10:41 PM
Hi Jon.
If the axle has been lowered and has ended up narrower.
The geometry will change and as the axle is narrower something has to give so the radius arms will try and force the axle forwards.
Its simple geometry.
It can be challenging to get everything to fall into place.
Everything has to be loose when assembled including the spring shackles and spring clamps to see where things want to go.
If drop plates are used then they can be tweeked to allow things to fit.
If the axle has been lowered and has ended up narrower.
The geometry will change and as the axle is narrower something has to give so the radius arms will try and force the axle forwards.
Its simple geometry.
It can be challenging to get everything to fall into place.
Everything has to be loose when assembled including the spring shackles and spring clamps to see where things want to go.
If drop plates are used then they can be tweeked to allow things to fit.