25-02-2022, 07:27 PM
Dennis,
a 7/16W multipoint socket fits the outside of the nut you are talking about - if you thin it down it will fit with the outer hub still on.
The thread inside this nut is the special 5/8" x 16 tpi used on the half shafts, radius arm ends and possibly elsewhere.
a 7/16W multipoint socket fits the outside of the nut you are talking about - if you thin it down it will fit with the outer hub still on.
The thread inside this nut is the special 5/8" x 16 tpi used on the half shafts, radius arm ends and possibly elsewhere.