12-02-2022, 10:09 PM
(12-02-2022, 08:42 PM)Slack Alice Wrote: I don't think this is the case here, but some Seven brakes can in a very odd way.
Having been applied first thing - reversing down the drive - they can lock on, and only be relased by driving backwards.
After that, everything is (usually) fine.
I have a similar problem occasionally with my RP's brakes, especially if the linings are new. Indeed, this morning, when I reversed the Seven out of the garage, the one front wheel locked on as I was turning. Going forward it came off and the brakes worked fine afterwards. The last time I had the front brakes to bits, I noticed a certain amount of 'rock' in the cam bushes, so I suspect this may be causing the problem. A job for the spring, perhaps.