07-03-2018, 05:44 PM
(This post was last modified: 07-03-2018, 05:47 PM by Austin in the Shed.
Edit Reason: add content
)
No I can't countersink it but there are plenty of them about,I can find a spare if you can't.
Another thing,or two to mention is to check they are not split due to over tightening and the bronze guide will likely need shortening, (1/8" or so) even on just reprofiled followers or the locknut could rest on it(ie the follower doesn't touch the cam)
Reduce length on guide on tappet chest end.
Another thing,or two to mention is to check they are not split due to over tightening and the bronze guide will likely need shortening, (1/8" or so) even on just reprofiled followers or the locknut could rest on it(ie the follower doesn't touch the cam)
Reduce length on guide on tappet chest end.