06-03-2018, 10:51 PM
(This post was last modified: 06-03-2018, 10:51 PM by Nick Lettington.)
I tried to reuse the diff carrier from an axle that had half the crown wheel teeth in the bottom of the casing. It was quite distorted... If the CWP pair was running out of true for a while and has worn unequally and the diff carrier is already distorted, you might as well try adusting it a little or simply drive until it goes pop (it may never). Other than the bearings, which you may struggle to re-use, the bits likely to be wrecked if it does die sound like they are already no good to re use.
Just my halfpennyworth..
Just my halfpennyworth..