22-01-2022, 10:38 AM
Hello John P. If it was my car I would leave things as they are for now and keep running your car but checking the oil after each run to establish how much is leaking out. Clean all around the sump and bottom of the bell housing after each run to check to see if there are any traces of oil from around the sump. Rather than bell housing. Should it be the oil thrower that’s the problem on my two bearing Ruby engine I fitted one of the modem lip seals with a seal and adapter plate from A7 components without the need for an machining.
John Mason
John Mason
Would you believe it "Her who must be obeyed" refers to my Ruby as the toy.