04-03-2018, 08:22 PM
Hi Folks,
I have been using Delrin engine mounts for the last couple of years with no problems.
My car is Roadgoing / Hillclimbing.
I use old valve springs on long studs to hold the engine in, the spring tension can be varied by winding the locknuts up and down.
Delrin is quite hard and turns easily,
I used Delrin as we use a lot of it at work ( free offcuts )
Cheers Richard
I have been using Delrin engine mounts for the last couple of years with no problems.
My car is Roadgoing / Hillclimbing.
I use old valve springs on long studs to hold the engine in, the spring tension can be varied by winding the locknuts up and down.
Delrin is quite hard and turns easily,
I used Delrin as we use a lot of it at work ( free offcuts )
Cheers Richard