10-01-2022, 10:14 PM
(This post was last modified: 10-01-2022, 10:16 PM by Hedd_Jones.)
Just to update. Used the roller method tonight. 2 different size rollers used.
I shot for 6mm from a straight edge over the bellhousing, got a smidge over 0.25 inch. This is about 1.15 from the clutch plate.
Seems to work on the stand.
I shot for 6mm from a straight edge over the bellhousing, got a smidge over 0.25 inch. This is about 1.15 from the clutch plate.
Seems to work on the stand.