05-01-2022, 06:43 PM
Hi Denis
"Never a drip through a Jubilee Clip" they used to say, in the days before the advertising standards authority.
I found the repro Enots clips tended to cut into the hoses, though never had one snap.
Nowadays I use stainless Jubilee types, which they have had 100 years to perfect. A small quarter inch drive hex socket is much nicer for tightening than a slippery flat blade screwdriver.
"Never a drip through a Jubilee Clip" they used to say, in the days before the advertising standards authority.
I found the repro Enots clips tended to cut into the hoses, though never had one snap.
Nowadays I use stainless Jubilee types, which they have had 100 years to perfect. A small quarter inch drive hex socket is much nicer for tightening than a slippery flat blade screwdriver.