27-12-2021, 08:10 AM
Hi Steve
It’s 1/4” and as Jim says the Cherished suppliers stock it along with the 1/4” nipples and BSP thread nuts that fit the tap and float entry.
I seem to remember that 3’ was about enough for my RK but only just enough. Probably safer to get 4’.
Cheers
Howard
It’s 1/4” and as Jim says the Cherished suppliers stock it along with the 1/4” nipples and BSP thread nuts that fit the tap and float entry.
I seem to remember that 3’ was about enough for my RK but only just enough. Probably safer to get 4’.
Cheers
Howard