21-12-2021, 02:01 AM
(This post was last modified: 21-12-2021, 02:04 AM by Steve Bryant.)
Tony,
the sump is a standard pressed tin item. The studs and nuts are an effort the save the threads in the crankcase. A silicone gasket from Jamie is used and the thick metal surround is employed to keep the mating surface flat.
As for BL heritage not knowing about Properts was a bit odd I thought. Anyway thanks for the encouragement
Stephen
Flywheel : There is no butchery here just adjusting a component to allow for things to go together without stress
Stephen
the sump is a standard pressed tin item. The studs and nuts are an effort the save the threads in the crankcase. A silicone gasket from Jamie is used and the thick metal surround is employed to keep the mating surface flat.
As for BL heritage not knowing about Properts was a bit odd I thought. Anyway thanks for the encouragement
Stephen
Flywheel : There is no butchery here just adjusting a component to allow for things to go together without stress
Stephen