19-12-2021, 10:54 AM
(This post was last modified: 19-12-2021, 12:36 PM by Martin Prior.)
Unfortunately, the Source Book information makes no reference at all to the machine screws! I simply can't work out where they would go or what purpose they would serve. Given the number of sunroof sets that we've sent out or fitted without them, they can't be very important.
This is an original sunroof installation from a Mk2 Ruby. It had already been dismantled when it came to us. There are some out-of-sequence holes at the front(circled) and I believe there was a similar pair at the back. I assume that these were associated with the machine screws, but where did the other ends emerge? If they went all the way through, surely they'd interfere with the headlining and if they didn't, how would the nuts be accessed?
This is an original sunroof installation from a Mk2 Ruby. It had already been dismantled when it came to us. There are some out-of-sequence holes at the front(circled) and I believe there was a similar pair at the back. I assume that these were associated with the machine screws, but where did the other ends emerge? If they went all the way through, surely they'd interfere with the headlining and if they didn't, how would the nuts be accessed?