28-02-2018, 01:15 PM
(28-02-2018, 10:15 AM)Hugh Barnes Wrote: No, you should use 3mm ply. The best to use is 'Birch faced' and should have the flexibility you need to accomodate the pressed cover. The door cards are not flat as Ruairidh has suggested...
Don't stint on the ply, the correct material is a little pricey but absolutely worth the money. The last sheet I bought I could roll up and put in the back of my car. It is that flexibilty you need in my opinion...
hth....
or.... you could use a sheet of waterproof thermosetting plastic and crease the edges. Those of us who have alternators, electronic ignition, full flow oil filters, LED lights , 2 pak paint, staples, foam, etc, etc
should have no problem with that invisible upgrade.
ducks down behind the parapet
good morning Hugh