19-11-2021, 06:37 PM
Hi Roger,
Just checked the top hinge end screws, they appear to be 4BA, I have screwed a standard 4BA bolt into the ends of the hinge and screwed a standard 4BA nut onto the actual hinge end screw and they all seem to fit. The issue in obtaining replacements is that the screw head is a much larger diameter than a standard 4BA machine screw, so I'm not sure where these could be otained. Mine where still serviceable and did not need replacing.
Just checked the top hinge end screws, they appear to be 4BA, I have screwed a standard 4BA bolt into the ends of the hinge and screwed a standard 4BA nut onto the actual hinge end screw and they all seem to fit. The issue in obtaining replacements is that the screw head is a much larger diameter than a standard 4BA machine screw, so I'm not sure where these could be otained. Mine where still serviceable and did not need replacing.