19-11-2021, 09:26 AM
Hi Jon
You can bore out the 22FZ Venturi and the original updraft manifold. Thinning down the butterfly will also help.
I’ve done this on a carb ready for my RK engine build (just back from having a rebore and rods white metalled). But I don’t know how it performs in practice. Hopefully a useful increase and no visible modifications externally.
Cheers
Howard
You can bore out the 22FZ Venturi and the original updraft manifold. Thinning down the butterfly will also help.
I’ve done this on a carb ready for my RK engine build (just back from having a rebore and rods white metalled). But I don’t know how it performs in practice. Hopefully a useful increase and no visible modifications externally.
Cheers
Howard