08-11-2021, 05:09 PM
Hi
Here is another tip.
Once you’ve got the spring pins in you will need to move them in and out and around to align the cotter pin. Use two nuts on the damper thread at end of the pin tightened together. You can then twist with a spanner to alight the cotter in the hole.
Cheers
Howard
Here is another tip.
Once you’ve got the spring pins in you will need to move them in and out and around to align the cotter pin. Use two nuts on the damper thread at end of the pin tightened together. You can then twist with a spanner to alight the cotter in the hole.
Cheers
Howard