28-10-2021, 08:17 PM
(This post was last modified: 28-10-2021, 08:18 PM by jansens.
Edit Reason: Spelling
)
As a comparison I have just rebuilt a Riley 9 rear axle and torque tube. I had the casing and tube (tube and driveshaft have been shortened locally - cost about £115 in UK money) and some other bits already but had to buy a good second hand diff, new CWP (5:1), 2 new half shafts, 2 new hub backing plates and seals, new bearings throughout and new wheel studs (6 per wheel) and special wheel nuts (Riley ones are handed) and that was all around £2500.
That's just for the parts I had to buy.
We won't even go into the cost of getting that all that stuff to NZ! The half shafts arrived with the shafts poking out of the box either side with only the hubs keeping them in!
That's just for the parts I had to buy.
We won't even go into the cost of getting that all that stuff to NZ! The half shafts arrived with the shafts poking out of the box either side with only the hubs keeping them in!