28-10-2021, 06:01 PM
Hi Rupert W
No, don't bridge across the ignition light. You can run with a working light, or it will function happily with an open circuit (the bulb current isn't necessary).
If you are still seeing a discharge when the engine is running at road speed, you either have not enough dynamo output or too large a current drain.
No, don't bridge across the ignition light. You can run with a working light, or it will function happily with an open circuit (the bulb current isn't necessary).
If you are still seeing a discharge when the engine is running at road speed, you either have not enough dynamo output or too large a current drain.