26-10-2021, 09:24 PM
I had to do this on the Top Hat project last year, covered in this thread:
Fitting windscreen glass into the frame (austinsevenfriends.co.uk)
Your glazier should be able to supply 6.4mm (1/4") laminated glass. Mine insisted on patterns, which I cut from hardboard, but you could use cardboard. Just make sure it's accurate.....
Fitting windscreen glass into the frame (austinsevenfriends.co.uk)
Your glazier should be able to supply 6.4mm (1/4") laminated glass. Mine insisted on patterns, which I cut from hardboard, but you could use cardboard. Just make sure it's accurate.....