20-09-2021, 08:40 PM
ive not made shackle replacement pins for a wile as suggested new shackles are available. or at least they usually are.
but when i made them they were in EN24T.
there are pitfalls though.
its a strong steel for getting a small grease hole that far down the shaft.
oversize the hole, and it weekens the shaft.
to much undercut for the thread, and it will weeken the shaft.
tony
but when i made them they were in EN24T.
there are pitfalls though.
its a strong steel for getting a small grease hole that far down the shaft.
oversize the hole, and it weekens the shaft.
to much undercut for the thread, and it will weeken the shaft.
tony