The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ruby speedo cable routing
#7
The cable on my car takes a slightly longer route after it leaves the battery box by passing round the main cable going to the starter motor before diving between the chassis rail and steering arm/drag link connection.  Where the cable passes the chassis rail, the steering arm/drag link only just miss it as they go back and forth.  On these later cables the armouring is of greater diameter than the originals? 

The speedo cable has to be kept away from the starter motor switch, or it can cause a short and start a fire.

Colin
Reply


Messages In This Thread
Ruby speedo cable routing - by sjthompson - 30-08-2021, 07:19 PM
RE: Ruby speedo cable routing - by Derek Sheldon - 30-08-2021, 08:29 PM
RE: Ruby speedo cable routing - by sjthompson - 30-08-2021, 09:04 PM
RE: Ruby speedo cable routing - by flywheel1935 - 30-08-2021, 10:11 PM
RE: Ruby speedo cable routing - by Tony Griffiths - 30-08-2021, 11:50 PM
RE: Ruby speedo cable routing - by Tony Press - 31-08-2021, 12:55 AM
RE: Ruby speedo cable routing - by Colin Morgan - 31-08-2021, 09:06 AM
RE: Ruby speedo cable routing - by Graham Barker - 31-08-2021, 10:20 AM
RE: Ruby speedo cable routing - by Tony Griffiths - 31-08-2021, 10:46 AM
RE: Ruby speedo cable routing - by Colin Morgan - 31-08-2021, 12:27 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)