29-08-2021, 07:55 PM
Hello Steve,
when I have fitted new springs I set them up between the teeth at rest and not on the tip. Also I have found they are stronger than the original ones, so I bend the ears back in situ until the pinion spins out freely and is still held by the spring on return.
Hope this is of help.
when I have fitted new springs I set them up between the teeth at rest and not on the tip. Also I have found they are stronger than the original ones, so I bend the ears back in situ until the pinion spins out freely and is still held by the spring on return.
Hope this is of help.