ARQ Ruby seat locking bar

[Ilmoro]

  seat2.jpg (Size: 60.96 KB / Downloads: 313)
  seat3.jpg (Size: 70.87 KB / Downloads: 313)
  seat4.jpg (Size: 59.47 KB / Downloads: 314)
  seat5.jpg (Size: 75.17 KB / Downloads: 315)
  seat6.jpg (Size: 76.92 KB / Downloads: 313) The photo you have posted is of the basic seat positions prior to fitting any of the sliding seat apparatus. I have attached a similar view of my ARR Ruby and also various pictures of the seat sliding frame and its construction. I would be surprised if the ARR construction is different to the ARQ.

Photo 1 is of the seat inverted with the sliding seat frame fitted looking from the front of seat
Photo 2 &3 Is a photo with seat inverted of the frame partially slid onto seat
Photo 4 Is the underside of the seat prior to fitting the sliding frame (Note the seat locking lever is fitted to this part)
Photo 5 Is the sliding frame with hinges.
Photo 6 is a photo of the seat stands which are fitted to the car body. This is essentially the same as the photo you posted but with one seat in place.

Hope the above is useful


Ian