04-08-2021, 03:59 PM
I've made a 5/16 BSF Cap head bolt into a direct replacement for the square headed abomination. Made it in the pillar drill with a file. No lathe at home. I also removed the square headed abomination without taking the block off.
Had I have taken the block off, Ian and Ruairidhs suggestion is best way by far. Saw it done on a Special I had, very good idea. Just make sure the bolt doesn't bottom out on the cam and nip it tight (don't ask how I know about that one LOL).
Had I have taken the block off, Ian and Ruairidhs suggestion is best way by far. Saw it done on a Special I had, very good idea. Just make sure the bolt doesn't bottom out on the cam and nip it tight (don't ask how I know about that one LOL).