02-08-2021, 06:24 PM
Hi all
I have a flooding carb on my mk1 ruby, gushing out of the hole on the top of the carb, I have removed the carb and checked to make sure the float and cut off needle are working and all seems well, however before this started I replaced the diaphragm in the fuel pump
Could the pump pressure be overcoming the float needle seal ?
Ideas and suggestions welcome
Thanks
Mike
I have a flooding carb on my mk1 ruby, gushing out of the hole on the top of the carb, I have removed the carb and checked to make sure the float and cut off needle are working and all seems well, however before this started I replaced the diaphragm in the fuel pump
Could the pump pressure be overcoming the float needle seal ?
Ideas and suggestions welcome
Thanks
Mike