The following warnings occurred:
Warning [2] Undefined variable $search_thread - Line: 60 - File: showthread.php(1617) : eval()'d code PHP 8.1.31 (Linux)
File Line Function
/inc/class_error.php 153 errorHandler->error
/showthread.php(1617) : eval()'d code 60 errorHandler->error_callback
/showthread.php 1617 eval




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Steering drag link ball pins size.
#3
Thanks Stuart.
Mine measuring at right angles and diagonally between the first 2 top to bottom.
0.5470, 0.5438, 0.5460, 0.5570. So around 3.2 thou between fore and aft and side to side faces.
0.5520, 0.5500, 0.5520, 0.5505. so that is around 2 thou between fore and aft and side to side.
So looks like they are ok for further use.

Springs 0.579 and 0.632.......thus new springs required.

They do have grease nipples each end and used Moly but next will be using the AFMT dosed grease.
Reply


Messages In This Thread
RE: Steering drag link ball pins size. - by Dennis Nicholas - 22-07-2021, 07:47 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)