24-06-2021, 08:40 PM
For interest, the pistons have the same markings.
It will need a rebore and new pistons as the pistons can be “wobbled” in the bore
with my thumb.
I will decide on a new size after careful measurement.
The crank seems remarkably unworn; no discernible wobble or end float, and the big ends are the same. But more investigation before I decide to leave it as it is as I can’t believe it won’t need at least big end bearings renewed.
It will need a rebore and new pistons as the pistons can be “wobbled” in the bore
with my thumb.
I will decide on a new size after careful measurement.
The crank seems remarkably unworn; no discernible wobble or end float, and the big ends are the same. But more investigation before I decide to leave it as it is as I can’t believe it won’t need at least big end bearings renewed.