Thank you Ian. It turns out that both sides are out, though the right hand one is not out as much. I wonder if this was some strange way to introduce some negative camber. The odd part is that the spring hangers have been welded in the correct position(LWB axle to SWB chassis with 1931 CWP housing pre D type) in a very professional looking way. Outriggers were once cutoff at the chassis rails and then replaced at some point. Maybe a monoposto at some point?
All pretty mysterious mods to a neophyte, including the chassis being semi boxed at the rear of the CC.
Erich in Mukilteo
All pretty mysterious mods to a neophyte, including the chassis being semi boxed at the rear of the CC.
Erich in Mukilteo