07-06-2021, 09:05 PM
I check moderns with lengths of angle iron sitting on concrete blocks. It is impossible for one person to work an internal calliper gauge and ditto an external device.
For the Seven have a light U wooden frame with nail heads projecting at each side. One nail is lightly held by staples so can be moved. Used internally. Easily handled by one person.
Because the adjustment step is so large I suspect many "mechanics " have sprung the track rod. This and forcing the steering straightens and lengthens the light component. With the early lighter radius rods can ends be 1/2 turned? .
For the Seven have a light U wooden frame with nail heads projecting at each side. One nail is lightly held by staples so can be moved. Used internally. Easily handled by one person.
Because the adjustment step is so large I suspect many "mechanics " have sprung the track rod. This and forcing the steering straightens and lengthens the light component. With the early lighter radius rods can ends be 1/2 turned? .