04-06-2021, 08:12 PM
I too have just constructed a TDC indicator plus timing mark. In my two wheeler days I used a dial test indicator to measure the firing point, I may even modify this device to suit a dti.
I have also added a manual timing adjuster so that I can fine tune the timing on the road, it is easy to feel the best spot, then just lock the distributor in that position.
A Rubber finger stretched over the top of the top of this indicator plug also shows the firing stroke before inserting the steel rod.
Roger
I have also added a manual timing adjuster so that I can fine tune the timing on the road, it is easy to feel the best spot, then just lock the distributor in that position.
A Rubber finger stretched over the top of the top of this indicator plug also shows the firing stroke before inserting the steel rod.
Roger
Location:- Haverfordwest, Pembrokeshire.