01-06-2021, 08:41 AM
(This post was last modified: 01-06-2021, 09:04 AM by flywheel1935.)
Morning guys, Ruairidh the Powerspark system I fitted came complete , inc thier coil, dizzy, leads etc, but my original dizzy is currently being rebuilt, as I prefer the copper leads anyway, so either can be kept as spare.
John, correct the 20 degree BTC is to be checked ( according to builder ) at 2-3000rpm, all I can do now is recheck the whole system and report my findings later in the week.
Over and out !!!!
John , quick update, All the jets I can access are as you described, ref the numbers stamped on them, apart from the progression jet that I cannot check due to a stuck access plug ' Ill attempt to remove later but I guess as the others are correct, then this should also be the case ???
John, correct the 20 degree BTC is to be checked ( according to builder ) at 2-3000rpm, all I can do now is recheck the whole system and report my findings later in the week.
Over and out !!!!
John , quick update, All the jets I can access are as you described, ref the numbers stamped on them, apart from the progression jet that I cannot check due to a stuck access plug ' Ill attempt to remove later but I guess as the others are correct, then this should also be the case ???