21-05-2021, 12:25 AM
(This post was last modified: 21-05-2021, 12:31 AM by Steve Parkin.)
Last year I rebuilt the starter button on our 32 RN.
It developed the same fault and eventually gave up the ghost. Required a good clean out (lots of crud), polishing up the contacts and some work on circlips etc. I also improved the insulation around the leads which needed a bit to be desired.
Interesting job and the pictures on the forum helped.
I removed the rivets which the mounting screws pass through to get into the heart of it. I replaced them with modified leatherwork eyelets which were just the right size.
It developed the same fault and eventually gave up the ghost. Required a good clean out (lots of crud), polishing up the contacts and some work on circlips etc. I also improved the insulation around the leads which needed a bit to be desired.
Interesting job and the pictures on the forum helped.
I removed the rivets which the mounting screws pass through to get into the heart of it. I replaced them with modified leatherwork eyelets which were just the right size.