06-05-2021, 11:11 PM
I have not been able to find a description for removing the dynamo on my late 1937 Ruby. The descriptions that I have come across refer to removal of three long bolts, but my dynamo does not appear to have have three. I have removed the short top bolt and the dynamo can be moved up and down a little but does not want to come out.
There are two screw heads top and bottom of the dynamo outer end. Very difficult to access with a screwdriver within the confines of the engine compartment.
The markings on the dynamo appear to indicate that it is a C35A.
I would appreciate advice on removal of the dynamo.
There are two screw heads top and bottom of the dynamo outer end. Very difficult to access with a screwdriver within the confines of the engine compartment.
The markings on the dynamo appear to indicate that it is a C35A.
I would appreciate advice on removal of the dynamo.