05-05-2021, 11:17 PM
Hi Jon E
If a 26VA on your car, it will differ from the photos in Vol 2 notably the vertical slow run screw. May be the basis of the two different float chambers.
Uncertiin jets can be gauged using the taper of a needle or safety pin. Check from both ends.
On other makes it is more common to eliminate flat spots by increasing the slow run jet.
If a 26VA on your car, it will differ from the photos in Vol 2 notably the vertical slow run screw. May be the basis of the two different float chambers.
Uncertiin jets can be gauged using the taper of a needle or safety pin. Check from both ends.
On other makes it is more common to eliminate flat spots by increasing the slow run jet.