03-05-2021, 10:02 AM
Hi Peter
If you are going to have a go at soldering. Clean the tank out thoroughly. There must be absolutely no trace of petrol around at all. (Sorry if this is teaching Granny to suck eggs ).
I have used solder paint recently as a flux. Works very well. Funnily enough I’ve not had much success with Bakers!
Cheers
Howard
If you are going to have a go at soldering. Clean the tank out thoroughly. There must be absolutely no trace of petrol around at all. (Sorry if this is teaching Granny to suck eggs ).
I have used solder paint recently as a flux. Works very well. Funnily enough I’ve not had much success with Bakers!
Cheers
Howard