08-04-2021, 08:13 AM
(06-04-2021, 10:34 PM)Cliff Ringrose Wrote: That is excactly what I intended to do, but 8MM fork end turnbucles have 8mm clevice pins, 8mm eyed end turnbucles do not have 8mm eyes suitable for clevis pins, they have 13mm eyes for a rope or cable to loop through. If you know a supplier of eyed turnbucles with an eye the same size as the nominal screw size I would be glad to hear of it.
Cliff.
The M8 rigging screws that I've got have 8mm pin holes in both the fork and eye ends. They fit perfectly with Austin 7 clevis pins.
Off the top of my head, I can't remember where I got them, but I will have a record somewhere and will let you know. Might even have been ebay!
John