07-04-2021, 01:48 PM
(This post was last modified: 07-04-2021, 01:52 PM by Hedd_Jones.)
We will have to get ours together at some point when all this nonsense is finished Alan.
David, this will give you the idea. Clearly I trimmed the angled members. I will be keeping the number plate (not shown), but the hinges will remain (also not shown).
I believe the horizontal brackets on the RP are cranked to go around the rear tank, but it will not be beyond the wit of man to fit this to an RP. Most of it is bolted together with button head cap heads with nylocks, rather than rivetted.
P.S I prefer the black wheels
David, this will give you the idea. Clearly I trimmed the angled members. I will be keeping the number plate (not shown), but the hinges will remain (also not shown).
I believe the horizontal brackets on the RP are cranked to go around the rear tank, but it will not be beyond the wit of man to fit this to an RP. Most of it is bolted together with button head cap heads with nylocks, rather than rivetted.
P.S I prefer the black wheels
![[Image: 170147864_10223066556306868_313399153453...e=6094DA5A]](https://scontent-lhr8-1.xx.fbcdn.net/v/t1.6435-9/170147864_10223066556306868_3133991534533505202_n.jpg?_nc_cat=108&ccb=1-3&_nc_sid=730e14&_nc_ohc=H95ewxROhR4AX_ulGbO&_nc_ht=scontent-lhr8-1.xx&oh=464097999f86ca3163fa4968310d66a1&oe=6094DA5A)