02-04-2021, 10:59 AM
Hi Jon
Funny you should ask this but I made up this tool just a couple of days ago. It’s an old adjustable brake end with a bar rod fixed through the clevis pin. Tighten the tool on the free end of the brake cable and lever against the cross member until the cable is tight enough then fasten the adjuster nut.
Not tried it in anger yet so it might not work .
Cheers
Howard
Funny you should ask this but I made up this tool just a couple of days ago. It’s an old adjustable brake end with a bar rod fixed through the clevis pin. Tighten the tool on the free end of the brake cable and lever against the cross member until the cable is tight enough then fasten the adjuster nut.
Not tried it in anger yet so it might not work .
Cheers
Howard