28-03-2021, 09:32 AM
Hi Bob,
Thanks for the advice, I think then in terms of the bearings its see what there like on inspection. I think I will get some in just in case as most things I have fixed have opened a can of worms and meant I've had to fix more than originally thought so may as well assume the bearings will be the same.
On another note, when riveting the wheel studs onto the hub, what's the best way/tooling for doing this. My thought is to assemble and clamp the stud, hub and rivet in then hit the end of the rivet to squash it flat.
Thanks for the advice, I think then in terms of the bearings its see what there like on inspection. I think I will get some in just in case as most things I have fixed have opened a can of worms and meant I've had to fix more than originally thought so may as well assume the bearings will be the same.
On another note, when riveting the wheel studs onto the hub, what's the best way/tooling for doing this. My thought is to assemble and clamp the stud, hub and rivet in then hit the end of the rivet to squash it flat.