20-03-2021, 03:06 PM
Hi JonE
Not directly what you were asking, but i have tried various sealants in the past for the top and bottom water branches. By far the best has been Loctite Si5660 grey silicone with no paper or composition gasket. I tighten the joint only a little to begin with, then some more once the sealer is fully cured. This technique seems to result in a thicker/stronger bead within the joint.
Not directly what you were asking, but i have tried various sealants in the past for the top and bottom water branches. By far the best has been Loctite Si5660 grey silicone with no paper or composition gasket. I tighten the joint only a little to begin with, then some more once the sealer is fully cured. This technique seems to result in a thicker/stronger bead within the joint.